1kV aluminum alloy core extruded insulated power cable

The 1kV aluminum alloy core power cable produced by Shandong Yanggu Cable Group is fixedly laid on transmission and distribution lines with AC 50Hz and rated voltage of 1kv and below for transmitting electric energy, replacing copper with aluminum. The laying method can be buried underground, in the air, on a bridge, underwater, etc.

1. Product execution standards

1. GB/T 31840.1-2015 Aluminum alloy core extruded insulated power cables with rated voltage 1kV (Um=1.2kV) to 35kV (Um=40.5kV) Part 1: Rated voltage 1kV (Um=1.2kV) and 3kV (Um =3.6kV) cable

2. GB/T 19666-2005 General rules for flame-retardant and fire-resistant cables (only applicable to flame-retardant and fire-resistant cables)

2. Product characteristics

1. Conditions of use

Rated working voltage: 0.6/1 (1.2) kV;

Cable laying temperature: ≥0℃;

The maximum allowable long-term operating temperature of cable conductors: PVC insulation: 70℃, XLPE insulation: 90℃;

The maximum working temperature of the cable during short circuit (maximum 5s): XLPE insulation, 250℃; PVC insulation, cross-sectional area ≤ 300mm², 160℃, cross-sectional area greater than 300mm², 140℃;

The minimum allowable bending radius of the cable: single core without armor 20D, single core with armor 15D, three core without armor 15D, three core with armor 12D, aluminum alloy interlocking armor 7D. Note: D is the actual outer diameter of the cable.

2. Structural requirements

The basic structure of 1kV aluminum alloy core extruded insulated power cable consists of three parts: conductor, insulation layer and protective layer.

1) conductor

The conductor is made of twisted aluminum alloy wire and meets the requirements of GB/T 3956-2008 standard. A conductor is the conductive part of a power cable that carries electrical energy.

2) Insulation

Insulation is extruded PVC or XLPE. Electrically isolate the wire core from the earth and wire cores of different phases to ensure power transmission.

3) Outer sheath

The outer sheath is PE or PVC, and flame retardant, termite-proof, low-smoke low-halogen flame-retardant, low-smoke halogen-free flame retardant and other materials can also be provided according to customer requirements. Its function is to protect the power cable from the intrusion of external impurities and moisture, and to prevent direct damage to the power cable by external forces.

3. Model description of 1kV aluminum alloy core extruded insulated power cable

Product code (omitted)

Characteristic code WDZ - low smoke halogen-free flame retardant; ZA (ZB, ZC) - flame retardant (A, B, C) level; NH - fire resistant;

Conductor material code aluminum alloy conductor-LH

Insulation material code

YJ-cross-linked polyethylene insulation; V-polyvinyl chloride insulation; E-ethylene propylene rubber insulation; EY-hard ethylene propylene rubber insulation

Sheath material code V-polyvinyl chloride sheath; Y-polyethylene or polyolefin sheath; F-elastomer sheath;

Armor material code

2-Double steel tape armor; 3-Fine round steel wire armor; 4-Thick round steel wire armor; 6-(Double) non-magnetic metal tape armor; 7-Non-magnetic metal wire armor S-Aluminum alloy belt coupling lock armor

Outer sheath material code

2-Polyvinyl chloride sheath; 3-Polyethylene or polyolefin sheath; 4-Elastomer sheath

Common models