|
|
BJ type lightning arrester puncture wire clamp
Collect
商品说明
商品参数
● Technical features 1. The lightning arrester puncture clamp and shield are suitable for quick connection between overhead insulated wires and lightning arresters; 2. No need to peel off the insulation layer, easy to install; 3. The wire passes directly through the clamp, thus reducing two skin breaking points and two connecting clamps. Puncture type thread clamping method: Insert the insulated wire parallel into the cable tray, first tighten the torque nut by hand, and then use a sleeve wrench to connect Tighten evenly until the top of the torque nut falls off, and then attach the insulation sheath device to the wire clamp Just enough.
相关商品
|
